Quantum DLT4000 20/40Gb Tape Drive Setup
 Quantum DLT, SDLT, DLT VS, DAT, LTO Backup Tape Drives Craystone is a Quantum Tape Drive Reseller |
Craystone Investments Ltd
149a Chorley New Road, Horwich
Bolton, BL6 5QE.
Tel: 01204 396301
Fax: (0)1204 396301
Email:
info@craystone.co.uk |
DLT4000 Overview (retired product)
The DLT4000 is now a retired Quantum product, and is no longer available new. However, we can offer refurbished units available for sale with 12 months RTB warranty. We also offer a fix price repair service for your faulty DLT4000 tape drive. Please contact us for details.
The DLT 4000 has three configurable options that may require modification based
on user requirements. These options are:
- SCSI ID (Default setting = ID 5)
- Parity checking (Default = parity checking enabled)
- TERMPWR (Termination power, default = enabled)
The following provides information on how to change these settings, refer to the drive diagrams provided to insure proper orientation.
To Set SCSI ID
Bare, Rack Mountable Drive
To change SCSI ID orient yourself to the drive as seen in figure 1-1 (drive front to your right). The SCSI ID block has 10 pins arranged in two rows of 5, top row is odd numbered and the bottom row is even. Set the ID values according to chart 1-1 by placing a jumper across the appropriate set of pins. Please note that for this block setting to register with the drive a jumper must be in place across pins 9-10.
Tabletop Drive
Use the thumb wheel switch found at the back of the drive and set the number to the ID required.
To Set Parity
Bare, Rack Mountable Drive
By default, the drive comes with parity checking enabled. In order to disable parity checking, place a jumper across pins 7-8 of the SCSI ID block (refer to figure 1-1). To enable parity remove the jumper, if present, from pins 7-8 of the SCSI ID block.
Tabletop Drive
Parity checking can only be disabled by an authorized service provider.
To Set TERMPWR
Bare, Rack Mountable Drive
To change TERMPWR orient yourself to the drive as seen in figure 1-2 (drive front to your left). Please note that it is recommended that this jumper remain in place as all devices can provide TERMPWR. If required, to disable TERMPWR remove the jumper across pins 3-4. To enable TERMPWR place a jumper across pins 3-4.
Tabletop Drive
TERMPWR cannot be disabled except by an authorized service provider.
Quantum DLT4000 PDF http://downloads.quantum.com/dlt4000/dlt4000productmanual.pdf
Media compatibility Tool Flash guide http://www.quantum.com/mediaanswers/wheel.html
|
PLEASE CONTACT US FOR ALL YOUR TAPE DRIVE
REQUIREMENTS |
|
Craystone Investments Ltd, 149a Chorley New Road, Horwich, Bolton, BL6 5QE |